May 01, 2019  Wake-on-LAN is an advanced feature that can come in handy in many home and business networking scenarios. Here’s a look at using it with Windows 10. Previously we looked at Wake-on-LAN (Local. By default, Windows automatically enables and uses plugged in network interfaces, including Wi-Fi and wired adapters. When a Wi-Fi connection or Ethernet stops functioning, the operating system disables the connection automatically. The connection can also be disabled manually to troubleshoot and fix network problems.

Windows usually detects the presence of a network adapter automatically; typically, you don’t have to install device drivers manually for the adapter. When Windows detects a network adapter, Windows automatically creates a network connection and configures it to support basic networking protocols. You may need to change the configuration of a network connection manually, however.

The following steps show you how to configure your network adapter on a Windows 10 system:

1Click the Start icon (or press the Start button on the keyboard), and then tap or click Settings.

The Settings page appears.

2Click Network & Internet.

The Network & Internet page appears.

3Click Ethernet.

The Ethernet settings page appears.

4Click Change Adapter Options.

The Network Connections page appears. This page lists each of your network adapters. In this case, only a single wired Ethernet adapter is shown. If the device has more than one adapter, additional adapters will appear on this page.

5Right-click the connection that you want to configure and then choose Properties from the contextual menu that appears.

This action opens the Ethernet Properties dialog box.

6To configure the network adapter card settings, click Configure.

The Properties dialog box for your network adapter appears. This dialog box has seven tabs that let you configure the adapter:

• General: Shows basic information about the adapter, such as the device type and status.
• Advanced: Lets you set a variety of device-specific parameters that affect the operation of the adapter.
• About: Displays information about the device’s patent protection.
• Driver: Displays information about the device driver that’s bound to the NIC and lets you update the driver to a newer version, roll back the driver to a previously working version, or uninstall the driver.
• Details: With this tab, you can inspect various properties of the adapter such as the date and version of the device driver. To view the setting of a particular property, select the property name from the drop-down list.
• Events: Lists recent events that have been logged for the device.
• Power Management: Lets you configure power management options for the device.

When you click OK to dismiss the dialog box, the network connection’s Properties dialog box closes and you’re returned to the Network Connections page. Right-click the network adapter and choose Properties again to continue the procedure.

7Review the list of connection items listed in the Properties dialog box.

• Client for Microsoft Networks: This item is required if you want to access a Microsoft Windows network. It should always be present.
• File and Printer Sharing for Microsoft Networks: This item allows your computer to share its files or printers with other computers on the network.This option is usually used with peer-to-peer networks, but you can use it even if your network has dedicated servers. If you don’t plan to share files or printers on the client computer, however, you should disable this item.
• Internet Protocol Version 4 (TCP/IPv4): This item enables the client computer to communicate by using the version 4 standard TCP/IP protocol.
• Internet Protocol Version 6 (TCP/IPv6): This item enables version 6 of the standard TCP/IP protocol. Typically, both IP4 and IP6 are enabled, even though most networks rely primarily on IP4.

8If a protocol that you need isn’t listed, click the Install button to add the needed protocol.

A dialog box appears, asking whether you want to add a network client, protocol, or service. Click Protocol and then click Add. A list of available protocols appears. Select the one you want to add; then click OK.

9To remove a network item that you don’t need (such as File and Printer Sharing for Microsoft Networks), select the item, and click the Uninstall button.

For security reasons, you should make it a point to remove any clients, protocols, or services that you don’t need.

10To configure TCP/IP settings, click Internet Protocol (TCP/IP); click Properties to display the TCP/IP Properties dialog box; adjust the settings; and then click OK.

The TCP/IP Properties dialog box lets you choose among these options:

Quarkxpress 9 quark x press 9 for mac. Installing QuarkXPress 9 Mac OS. Disable any virus protection software. If you are concerned about a virus infecting your computer, use virus protection software to check the installer and then disable any virus protection software before proceeding. Double-click the “QuarkXPress 9 Installer” icon.

• Obtain an IP Address Automatically: Choose this option if your network has a DHCP server that assigns IP addresses automatically. Choosing this option dramatically simplifies administering TCP/IP on your network.
• Use the Following IP Address: If your computer must have a specific IP address, choose this option and then type the computer’s IP address, subnet mask, and default gateway address.
• Obtain DNS Server Address Automatically: The DHCP server can also provide the address of the Domain Name System (DNS) server that the computer should use. Choose this option if your network has a DHCP server.
• Use the Following DNS Server Addresses: Choose this option if a DNS server isn’t available. Then type the IP addresses of the primary and secondary DNS servers.

Windows 10 instructionsContinue reading for instructions on how to enable, update, or reset your network adapter on your Windows 10 computer. Right-click the Start menu button at the bottom left corner of your Desktop screen.

Select Device Manager. The Device Manager window will appear and will show you a full list of the components that are installed on your computer, including the keyboard and mouse. Select Network Adapters. In this list, you will have a, which allows your computer to connect to the Internet while plugged into the modem with an, and you may also have a. Determine if your Internet-related issue is occurring while you are directly connected to the modem, or only through wireless, then find the appropriate network adapter in the list. Right-click on this driver and you will be presented with a list of options, including Properties, Enable or Disable, and Update.

First, select the Update option from this list and allow the update manager to run and install any new versions of the driver. If no updates can be found, or this has not resolved the issue, you can right click on the driver again and then select Disable, wait a few moments, and then choose Enable, which will reset the driver. Once completed, you can reconnect to your network and test the connection again.Related. Windows 8 instructionsFollow these instructions for how to enable, update, or reset your network adapter on your Windows 8 computer:. Navigate to your Desktop by selecting the Desktop app from your start screen, or by pressing the WINDOWS key.

Right-click on the bottom left corner of your Desktop screen to bring up your advanced Start menu. Select Device Manager. The Device Manager window will appear and will show you a full list of the components that are installed on your computer, including the keyboard and mouse. Select Network Adapters. In this list, you will have a, which allows your computer to connect to the Internet while plugged into the modem with an, and you may also have a. Determine if your Internet-related issue is occurring while you are directly connected to the modem, or only connected through wireless, then find the appropriate Network Adapter in the list.

Right-click on this driver and you will be presented with a list of options, including Properties, Enable or Disable, and Update. First, select the Update option from this list and allow the update manager to run and install any new versions of the driver.

If no updates can be found, or this has not resolved the issue, you can right click on the driver again and then select Disable, wait a few moments, and then choose Enable, which will reset the driver. Once completed, you can reconnect to your network and test the connection again. Windows 7 instructionsLearn how to enable, update, or reset your network adapter on your Windows 7 computer by following these instructions:. Start by clicking on your Start Orb and then find the Search Programs and Files option at the bottom of the window that appears. Enter Device Manager into this search field and then press the enter key. The Device Manager window will appear and will show you a list of the components that are installed on your computer, including the keyboard and mouse.

Select Network Adapters. Find Network Adapters on the list and then click the arrow icon located to the left of it, which will expand the category to show you all of the network adapters that are currently installed on your computer. You may see more than one device listed.

In this list, you will have a, modem with an, and you may also have a. Determine if your Internet-related issue is occurring while you are directly connected to the modem, or only connected through wireless, then find the appropriate network adapter in the list. Right-click on this driver and you will be presented with a list of options, including Properties, Enable or Disable, and Update.

First, select the Update option from this list and allow the update manager to run and install any new versions of the driver. If no updates can be found, or this has not resolved the issue, you can right click on the driver again and then select Disable, wait a few moments, and then choose Enable, which will reset the driver. Once completed, you can reconnect to your network and test the connection again. Sony drx 700ul driver for mac. Windows Vista instructionsIf you have a Windows Vista computer, follow the instructions below to learn how to enable, update, and reset your network adapter.

Start by clicking on your Start Orb and then find the Start Search option at the bottom of the window that appears. Enter Device Manager into this search field and then press the enter key. The Device Manager window will appear and will show you a full list of the components that are installed on your computer, including the keyboard and mouse. Select Network Adapters. Find Network Adapters on the list and then click the arrow icon located to the left of it, which will expand the category to show you all of the network adapters that are currently installed on your computer.

You may see more than one device listed. In this list, you will have a LAN Network Adapter, which allows your computer to connect to the Internet while plugged into the modem with an Ethernet cable, and you may also have a Wireless Network Adapter. Determine if your Internet-related issue is occurring while you are directly connected to the modem, or only connected through wireless, then find the appropriate network adapter in the list. Right-click on this driver and you will be presented with a list of options, including Properties, Enable or Disable, and Update. First, select the Update option from this list and allow the update manager to run and install any new versions of the driver. If no updates can be found, or this has not resolved the issue, you can right click on the driver again and then select Disable, wait a few moments, and then choose Enable, which will reset the driver.

Once completed, you can reconnect to your network and test the connection again. Windows XP instructionsThe following steps will explain how to enable, update and reset your network adapter on your Windows XP computer. Click on the Start menu, select Settings, and then select Control Panel. Select the System tool. Choose the Hardware tab and open the Device Manager.

Find Network Adapters on the list and then click the arrow icon located to the left of it, which will expand the category and show you all of the network adapters that are currently installed on your computer. You may see more than one device listed. In this list, you will have a, which allows your computer to connect to the Internet while plugged into the modem with an, and you may also have a. Determine if your Internet-related issue is occurring while you are directly connected to the modem, or only connected through wireless, then find the appropriate network adapter in the list. Right-click on this driver and you will be presented with a list of options, including Properties, Enable or Disable, and Update. First, select the Update option from this list and allow the update manager to run and install any new versions of the driver.

If no updates can be found, or this has not resolved the issue, you can right click on the driver again and then select Disable, wait a few moments, and then choose Enable, which will reset the driver. Once completed, you can reconnect to your network and test the connection again. Mac OS instructionsEnable, update, or reset your network adapter on your Mac OS computer by following these steps:. Navigate to the WiFi AirPort icon at the top of your desktop. Click on the WiFi AirPort icon and a drop-down list should appear with options such as Turn Wi-Fi Off, Join Other Network., and Open Network Preferences. From this list, click Turn Wi-Fi Off, then wait a full minute. Repeat this process to Turn Wi-Fi On.

Once completed, you can reconnect to your network and test the connection again.Related.